{"id":41099,"date":"2026-03-23T21:04:31","date_gmt":"2026-03-23T20:04:31","guid":{"rendered":"https:\/\/3dwork.io\/anycubic-kobra-x-review\/"},"modified":"2026-09-14T23:24:24","modified_gmt":"2026-09-14T21:24:24","slug":"anycubic-kobra-x-review","status":"publish","type":"post","link":"https:\/\/3dwork.io\/en\/anycubic-kobra-x-review\/","title":{"rendered":"Anycubic Kobra X Review: Multicolor FDM Under \u20ac200?"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\"><strong>Anycubic<\/strong> has been in a cycle of continuous improvement of its Kobra range for several years, but <strong>with the Kobra X it has taken a qualitative leap that goes beyond the usual iteration<\/strong>. This printer not only improves on speed or volume compared to the <a href=\"https:\/\/3dwork.io\/anycubic-kobra-3\/\">Kobra 3<\/a>: it comes with the <strong>ACE Gen 2 multicolor system integrated directly into the printhead<\/strong>, a design decision that transforms multicolor performance within the <strong>Anycubic<\/strong> ecosystem.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"650\" height=\"366\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp\" alt=\"- - -\" class=\"wp-image-40593\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp 650w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-300x169.webp 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-450x253.webp 450w\" sizes=\"auto, (max-width: 650px) 100vw, 650px\" \/><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">The Kobra 3 was a solid machine (in fact, we have our own <a href=\"https:\/\/3dwork.io\/anycubic-kobra-3\/\">review where we analyzed it in depth<\/a>) in which its ACE Pro system works as an external box connected to the printhead, with all that implies in terms of filament retractions and color change times. The Kobra X changes that approach from the ground up.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At 3Dwork we&#8217;ve spent weeks testing the Kobra X intensively (including a 72-hour continuous multicolor printing marathon). This is what we found, unfiltered.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">As always, before continuing with the article, a reminder that you can join 3DWork on our <a href=\"https:\/\/t.me\/s\/3dwork\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Telegram channel<\/a> full of 3D printing enthusiasts, or on our social media: <a href=\"https:\/\/www.instagram.com\/3dwork.io\/\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Instagram<\/a>, <a href=\"https:\/\/www.youtube.com\/@3dwork\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">YouTube<\/a>, <a href=\"https:\/\/www.tiktok.com\/@3dwork\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">TikTok<\/a>, <a href=\"https:\/\/twitter.com\/3dworkio\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Twitter<\/a> and <a href=\"https:\/\/www.facebook.com\/3dworkio\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Facebook<\/a>.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Anycubic Kobra X<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>Kobra X is a <em>bedslinger<\/em>-type printer<\/strong> (Cartesian&#8230; Y-axis moving bed) in the mid-to-high range positioned as the <strong>direct evolution of the Kobra 3 in Anycubic&#8217;s catalog<\/strong>. It&#8217;s not the brand&#8217;s first printer with automatic filament changing, but it is <strong>the first to integrate the ACE system directly into the printhead<\/strong> rather than adding it as an external box.<\/p>\n\n\n\n<figure class=\"wp-block-video\"><video autoplay controls loop muted src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/16\/mp4\/kx_tvc_en.mp4\" playsinline><\/video><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Physically, it retains some of the Kobra range&#8217;s DNA (brushed aluminum XZ bridge, Cartesian movement), but with improvements in rigidity and precision of its construction. A clear step forward compared to what the Kobra 3 offered.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Unlike many consumer printers that use stamped steel chassis, the Kobra X uses a <strong>13 mm thick machined aluminum bed frame<\/strong>. The result is rigidity and weight (9.5 kg) thanks to the industrial aluminum profiles of the XZ bridge, which complete the structure without any appreciable flex.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1015\" height=\"313\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-28.png\" alt=\"- - -\" class=\"wp-image-40599\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-28.png 1015w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-28-300x93.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-28-768x237.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-28-450x139.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-28-780x241.png 780w\" sizes=\"auto, (max-width: 1015px) 100vw, 1015px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The linear rails on the X and Y axes contribute to both precision and the overall quality feel: these are components that in machines in this price range are usually replaced with smooth rods. The dual Z-axis system synchronized by a belt at the top ensures the gantry stays vertical even at high accelerations.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>maximum speed is 600 mm\/s with acceleration up to 20,000 mm\/s\u00b2<\/strong>. As always with maximum speed figures: these are the absolute ceiling of the machine in free movement, not the typical working speed. At 300 mm\/s you get consistently good results depending on the material and project&#8230; and obviously with perfect slicer tuning.<\/p>\n\n\n\n<figure class=\"wp-block-video\"><video autoplay controls loop muted src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/05\/mp4\/KX-10-1.mp4\" playsinline><\/video><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">A complete Benchy prints in approximately <strong>13-17 minutes<\/strong> with the slicer&#8217;s default settings, which is already a meaningful real-world performance figure.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>3.5-inch<\/strong> touchscreen covers all configuration and monitoring functions without requiring an internet connection. The interface isn&#8217;t the most intuitive on the market, though it&#8217;s continuously improving, but it&#8217;s complete and allows you to control the machine autonomously.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The print volume is <strong>260 \u00d7 260 \u00d7 260 mm<\/strong>, compared to 250 \u00d7 250 \u00d7 260 mm on the Kobra 3. The difference in XY (10 mm per side) is modest but noticeable when working with parts that make full use of the platform. The 260 mm Z range remains the same.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img decoding=\"async\" src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2025-12\/30\/png\/kx-print-size.png\" alt=\"- - -\" title=\"- -\"><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">The <strong>physical dimensions of the machine are<\/strong> <strong>441.5 \u00d7 445.3 \u00d7 461.3 mm<\/strong>. With the bed in motion and the spool holders installed, <strong>the actual space required grows to approximately<\/strong> <strong>455 \u00d7 635 \u00d7 685 mm<\/strong>: it&#8217;s worth measuring before finding it a spot.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>Kobra X is equipped with a direct drive extruder with a 0.4 mm hardened steel nozzle<\/strong> as standard. The abrasion-resistant nozzle is a detail that many manufacturers reserve for more expensive models: here it comes from the factory, which allows the use of more abrasive filaments from day one without any upgrades.<\/p>\n\n\n\n<figure class=\"wp-block-video\"><video autoplay controls loop muted src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/07\/mp4\/kx-4-1.mp4\" playsinline><\/video><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>hotend Quick-Release system requires no tools to change the nozzle<\/strong>. In practice it works well for routine maintenance, though if the filament breaks inside the internal channels of the ACE Gen 2, a full teardown becomes more complicated due to the number of parts and components involved.<\/p>\n\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-eae4515\" data-v=\"2\" data-block-id=\"eae4515\"><style>.stk-eae4515 {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;margin-bottom:0px !important;}.stk-eae4515 .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-eae4515-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-18a9285\" data-block-id=\"18a9285\"><style>.stk-18a9285 {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-a44c20d\" data-block-id=\"a44c20d\"><style>.stk-a44c20d .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-a44c20d .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#0693e3 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-a44c20d\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-a-44-c-20-d-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-a-44-c-20-d-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M256 8C119.043 8 8 119.083 8 256c0 136.997 111.043 248 248 248s248-111.003 248-248C504 119.083 392.957 8 256 8zm0 110c23.196 0 42 18.804 42 42s-18.804 42-42 42-42-18.804-42-42 18.804-42 42-42zm56 254c0 6.627-5.373 12-12 12h-88c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h12v-64h-12c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h64c6.627 0 12 5.373 12 12v100h12c6.627 0 12 5.373 12 12v24z\"\/><\/svg><\/div><\/span><\/div>\n\n\n\n<div class=\"wp-block-stackable-heading aligncenter stk-block-heading stk-block-heading--v2 stk-block stk-60d689b\" id=\"strong-strong-strong-la-importancia-del-ajuste-del-enfoque-del-laser-strong-strong-strong-br-es-importante-strong-recalcar-que-cuanto-mas-pequeno-sea-el-foco-mayor-sera-la-precision-y-mejor-el-resultado-strong-br-por-otro-lado-recordar-que-strong-imperativo-reajustar-el-enfoque-strong-strong-cada-vez-que-se-graben-objetos-de-diferentes-alturas-o-incluso-de-diferentes-materiales-strong-br-un-enfoque-impreciso-puede-llevar-a-grabados-fallidos-o-de-muy-baja-calidad\" data-block-id=\"60d689b\"><p class=\"stk-block-heading__text\"><strong>Why does the extruder type matter?<\/strong><br>The direct drive extruder places the motor directly on the printhead, reducing the distance between the gear and the nozzle. This improves filament control, especially with flexible materials like TPU, and allows for shorter, more precise retractions. The trade-off is more moving mass, though modern acceleration control systems (input shaping) compensate for this effect.<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">In our tests, filament loading caused no issues even without paying special attention to the cut. The recommended approach is to cut the filament at 45\u00b0 before inserting it to get a clean tip that makes it easier to enter the internal channels of the ACE Gen 2 and reduce the risk of long-term clogs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>hotend reaches <b>300 \u00b0C<\/b><\/strong>, a temperature sufficient to cover all materials on the official list (PLA, PETG, ASA, TPU, PVA and carbon fiber filaments) and with headroom for higher-temperature technical materials if you want to experiment beyond the official catalog.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The layer cooling system performs well and causes no issues with standard PLA and PETG. On steep overhangs at high speed, as with any machine of this type, it&#8217;s worth reducing the speed on critical layers.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>heated bed reaches <\/strong><span style=\"background-color: rgba(51, 51, 51, 0.2);\"><b>100<\/b><\/span><strong> \u00b0C<\/strong> (official maximum temperature). It is powered by direct current (DC), which makes it somewhat slower to reach high temperatures compared to AC systems, but this is a common trade-off in this category.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0245\/5519\/2380\/files\/Even-Heat-Distribution.jpg?v=1767785179\" alt=\"- - -\" title=\"- -\"><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The print surface is a <strong>double-sided PEI plate<\/strong>, mounted on a 3 mm thick aluminum plate specifically redesigned to resist thermal deformation. The thicker aluminum plate is another differentiating detail compared to previous generations.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Adhesion with PLA and PETG is excellent from the first layer. For ASA, the bed at 100 \u00b0C (official maximum) is sufficient for good adhesion&#8230; though, as always with this type of material, having an enclosure can make results variable depending on the environment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The LeviQ 3.0 uses <strong>49 measurement points<\/strong>, sufficient for a 260 \u00d7 260 mm bed. The initial full calibration process (leveling, resonance compensation and input shaping) takes between 15 and 20 minutes and only needs to be repeated if the machine is moved or adhesion issues appear.<\/p>\n\n\n\n<figure class=\"wp-block-video\"><video autoplay controls loop muted src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/05\/mp4\/kx-11-1.mp4\" playsinline><\/video><\/figure>\n\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-b68ff6d\" data-v=\"2\" data-block-id=\"b68ff6d\"><style>.stk-b68ff6d {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;margin-bottom:0px !important;}.stk-b68ff6d .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-b68ff6d-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-8640439\" data-block-id=\"8640439\"><style>.stk-8640439 {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-ba78e7b\" data-block-id=\"ba78e7b\"><style>.stk-ba78e7b .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-ba78e7b .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#0693e3 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-ba78e7b\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-ba-78-e-7-b-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-ba-78-e-7-b-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M256 8C119.043 8 8 119.083 8 256c0 136.997 111.043 248 248 248s248-111.003 248-248C504 119.083 392.957 8 256 8zm0 110c23.196 0 42 18.804 42 42s-18.804 42-42 42-42-18.804-42-42 18.804-42 42-42zm56 254c0 6.627-5.373 12-12 12h-88c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h12v-64h-12c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h64c6.627 0 12 5.373 12 12v100h12c6.627 0 12 5.373 12 12v24z\"\/><\/svg><\/div><\/span><\/div>\n\n\n\n<div class=\"wp-block-stackable-heading aligncenter stk-block-heading stk-block-heading--v2 stk-block stk-584fad9\" id=\"strong-strong-strong-la-importancia-del-ajuste-del-enfoque-del-laser-strong-strong-strong-br-es-importante-strong-recalcar-que-cuanto-mas-pequeno-sea-el-foco-mayor-sera-la-precision-y-mejor-el-resultado-strong-br-por-otro-lado-recordar-que-strong-imperativo-reajustar-el-enfoque-strong-strong-cada-vez-que-se-graben-objetos-de-diferentes-alturas-o-incluso-de-diferentes-materiales-strong-br-un-enfoque-impreciso-puede-llevar-a-grabados-fallidos-o-de-muy-baja-calidad\" data-block-id=\"584fad9\"><p class=\"stk-block-heading__text\"><strong>What does the leveling system actually do?<\/strong><br>Automatic leveling measures the variation across the bed surface and creates a compensation mesh that the firmware applies during printing. What it does <em>not<\/em> do is set the initial Z-offset for you: that first adjustment of the distance between the nozzle and the bed is still manual (though assisted). Once correctly configured, the system compensates for bed imperfections transparently.<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">Now let&#8217;s get to <strong>the big news about this<\/strong> <strong>Anycubic Kobra X<\/strong>&#8230; <strong>the second-generation Anycubic Color Engine (ACE) integrated into the printhead<\/strong> is what fundamentally distinguishes the Kobra X from its predecessor, the Kobra 3. While the Kobra 3 incorporates the ACE Pro system as an external box connected to the printhead via long PTFE tubes, the ACE Gen 2 on the Kobra X is mounted directly on the printhead, reducing the filament retraction distance to just <strong>30 mm<\/strong>.<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"ACE GEN 2: 4-Color Built-in. Saving Time &amp; Filament-Global\" width=\"1170\" height=\"658\" src=\"https:\/\/www.youtube.com\/embed\/Uow4KpLthkc?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The practical difference is noticeable: the ACE Pro on the Kobra 3 requires retractions of 160 mm or more to purge the hotend before each color change, generating filament waste and waiting time. With 30 mm of retraction, Anycubic claims a waste reduction of up to <strong>81.25%<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We&#8217;ve been able to verify this: in intensive multicolor printing with hundreds of color changes, <strong>the difference in purge waste and total print time is significant&#8230;<\/strong> though we&#8217;ll also tell you that in reality these types of systems still generate a lot of waste.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"436\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-25-1024x436.png\" alt=\"- - -\" class=\"wp-image-40587\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-25-1024x436.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-25-300x128.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-25-768x327.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-25-450x192.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-25-780x332.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-25.png 1407w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"421\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-24-1024x421.png\" alt=\"- - -\" class=\"wp-image-40585\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-24-1024x421.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-24-300x123.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-24-768x315.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-24-450x185.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-24-780x320.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-24.png 1429w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The base unit supports <strong>4 native colors<\/strong> without any external box. <strong>By connecting up to four additional ACE 2 Pro units, the system scales up to<\/strong> <strong>19 simultaneous colors<\/strong>. The Kobra 3 with two ACE Pro units maxes out at 8 colors. The Kobra X has a clear scalability advantage here.<\/p>\n\n\n<p class=\"wp-block-paragraph\">The system also <strong>includes an adaptive extrusion force compensator that allows mixing materials of different hardnesses in the same job: for example, PLA + TPU (68D) in the same part<\/strong>. This opens up interesting design possibilities for functional parts that are not available with the ACE Pro on the Kobra 3.<\/p>\n\n\n\n<figure class=\"wp-block-video\"><video autoplay controls loop muted src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/07\/mp4\/kx-8-TPU-PLA.mp4\" playsinline><\/video><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The Kobra X is compatible with the <strong>Anycubic ACE 2 Pro<\/strong>, Anycubic&#8217;s second-generation filament drying and storage unit. This <strong>allows expanding the system up to 19 colors by connecting up to four additional ACE 2 Pro units to the Kobra X<\/strong>, as we mentioned earlier.<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"Anycubic Kobra X-LIMIT. LESS.-Global\" width=\"1170\" height=\"658\" src=\"https:\/\/www.youtube.com\/embed\/Rfze0GsOxc0?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The ACE 2 Pro also adds, beyond the color expansion, <strong>integrated active filament drying<\/strong>, a particularly useful feature for hygroscopic materials like Nylon, PVA, or PETG in humid environments.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The ACE 2 Pro also incorporates <strong>RFID chip filament recognition<\/strong>: Anycubic-brand spools with integrated chips are automatically identified by the system, which loads the recommended print parameters (temperature, speed, bed) without manual intervention. It only works with the brand&#8217;s own spools; for third-party filaments, configuration remains manual.<\/p>\n\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-2a65881\" data-v=\"2\" data-block-id=\"2a65881\"><style>.stk-2a65881 {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;margin-bottom:0px !important;}.stk-2a65881 .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-2a65881-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-3c65b10\" data-block-id=\"3c65b10\"><style>.stk-3c65b10 {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-e1694fe\" data-block-id=\"e1694fe\"><style>.stk-e1694fe .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-e1694fe .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#ff6900 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-e1694fe\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-e-1694-fe-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-e-1694-fe-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 576 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M569.517 440.013C587.975 472.007 564.806 512 527.94 512H48.054c-36.937 0-59.999-40.055-41.577-71.987L246.423 23.985c18.467-32.009 64.72-31.951 83.154 0l239.94 416.028zM288 354c-25.405 0-46 20.595-46 46s20.595 46 46 46 46-20.595 46-46-20.595-46-46-46zm-43.673-165.346l7.418 136c.347 6.364 5.609 11.346 11.982 11.346h48.546c6.373 0 11.635-4.982 11.982-11.346l7.418-136c.375-6.874-5.098-12.654-11.982-12.654h-63.383c-6.884 0-12.356 5.78-11.981 12.654z\"\/><\/svg><\/div><\/span><\/div>\n\n\n\n<div class=\"wp-block-stackable-heading aligncenter stk-block-heading stk-block-heading--v2 stk-block stk-b5a4a77\" id=\"strong-strong-strong-la-importancia-del-ajuste-del-enfoque-del-laser-strong-strong-strong-br-es-importante-strong-recalcar-que-cuanto-mas-pequeno-sea-el-foco-mayor-sera-la-precision-y-mejor-el-resultado-strong-br-por-otro-lado-recordar-que-strong-imperativo-reajustar-el-enfoque-strong-strong-cada-vez-que-se-graben-objetos-de-diferentes-alturas-o-incluso-de-diferentes-materiales-strong-br-un-enfoque-impreciso-puede-llevar-a-grabados-fallidos-o-de-muy-baja-calidad\" data-block-id=\"b5a4a77\"><p class=\"stk-block-heading__text\">There is one important point: <strong>the Kobra X is not compatible with the original ACE Pro<\/strong>. <br>If you are coming from a Kobra 3 or Kobra S1 and have ACE Pro units, you will not be able to use them with the Kobra X. The Kobra X is only compatible with the ACE 2 Pro. Anycubic confirms this explicitly in their official documentation.<br>Currently <strong>there is no support from the official slicer (Anycubic Slicer Next) for managing multiple ACE 2 Pro units on the Kobra X:<\/strong> the information available at the time of this review is limited. What is documented is the hardware compatibility. We will closely follow the evolution of software support and will update this review when there are developments.<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">In terms of connectivity and extra features, the Anycubic Kobra X includes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Dual-band Wi-Fi (2.4\/5 GHz)<\/li>\n\n\n\n<li>LAN mode (without internet connection, for privacy)<\/li>\n\n\n\n<li>Mobile app control (Anycubic)<\/li>\n\n\n\n<li>USB port (for storage only, not for direct PC connection)<\/li>\n\n\n\n<li>Integrated 720p HD camera (10 fps, with physical privacy cover)<\/li>\n\n\n\n<li>Power loss recovery (<em>Power Loss Resume<\/em>): saves the print state every layer to resume from the last point in case of power outage<\/li>\n\n\n\n<li>Spool tangle detection and filament runout sensor on all channels<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-video\"><video autoplay controls loop muted src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/05\/mp4\/kx-18-1.mp4\" playsinline><\/video><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">LAN mode is a very interesting feature for those who do not want print data leaving the local network. The only drawback is that <strong>mobile app monitoring is not available in LAN mode<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Below you will find a comparison table between the Kobra X and its smaller sibling, the Kobra 3:<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"957\" height=\"641\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-31.png\" alt=\"- - -\" class=\"wp-image-40625\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-31.png 957w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-31-300x201.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-31-768x514.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-31-450x301.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-31-780x522.png 780w\" sizes=\"auto, (max-width: 957px) 100vw, 957px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th><img decoding=\"async\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2023\/07\/anycubic_logo.png\" alt=\"- - -\" title=\"- -\"><\/th><th><img decoding=\"async\" src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/05\/png\/kx.png\" alt=\"- - -\" title=\"- -\"><br><strong>Anycubic Kobra X<\/strong><\/th><th><img decoding=\"async\" src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/05\/png\/k3V2.png\" alt=\"- - -\" title=\"- -\"><br><strong>Anycubic Kobra 3<\/strong><\/th><\/tr><\/thead><tbody><tr><td><strong>Technology<\/strong><\/td><td>FFF\/FDM<\/td><td>FFF\/FDM<\/td><\/tr><tr><td><strong>Print volume<\/strong><\/td><td><strong>260\u00d7260\u00d7260 mm<\/strong><\/td><td>250\u00d7250\u00d7260 mm<\/td><\/tr><tr><td><strong>Extruder<\/strong><\/td><td>Direct drive<\/td><td>Direct drive<\/td><\/tr><tr><td><strong>Max. hotend temp.<\/strong><\/td><td>300\u00b0C<\/td><td>300\u00b0C<\/td><\/tr><tr><td><strong>Max. bed temp.<\/strong><\/td><td>100\u00b0C<\/td><td>100\u00b0C<\/td><\/tr><tr><td><strong>Max. speed<\/strong><\/td><td>600 mm\/s<\/td><td>600 mm\/s<\/td><\/tr><tr><td><strong>Max. acceleration<\/strong><\/td><td>20,000 mm\/s\u00b2<\/td><td>20,000 mm\/s\u00b2<\/td><\/tr><tr><td><strong>Kinematics<\/strong><\/td><td>Cartesian (bedslinger)<\/td><td>Cartesian (bedslinger)<\/td><\/tr><tr><td><strong>Z axis<\/strong><\/td><td>Dual, belt-synchronized<\/td><td>Dual<\/td><\/tr><tr><td><strong>Leveling<\/strong><\/td><td>LeviQ 3.0 (49 points)<\/td><td>LeviQ 3.0 (49 points)<\/td><\/tr><tr><td><strong>Multicolor system<\/strong><\/td><td><strong>ACE Gen 2 integrated in printhead (4 base, up to 19)<\/strong><\/td><td>External ACE Pro (4 base, up to 8)<\/td><\/tr><tr><td><strong>Color change retraction<\/strong><\/td><td><strong>~30 mm<\/strong><\/td><td>~160 mm<\/td><\/tr><tr><td><strong>Display<\/strong><\/td><td>3.5&#8243; touchscreen<\/td><td>3.5&#8243; touchscreen<\/td><\/tr><tr><td><strong>Connectivity<\/strong><\/td><td>WiFi 2.4\/5GHz + LAN<\/td><td>WiFi + LAN<\/td><\/tr><tr><td><strong>Firmware<\/strong><\/td><td>Kobra OS (Klipper-based)<\/td><td>Kobra OS (Klipper-based)<\/td><\/tr><tr><td><strong>Stock nozzle<\/strong><\/td><td>Hardened steel 0.4 mm<\/td><td>Hardened steel 0.4 mm<\/td><\/tr><tr><td><strong>Bed surface<\/strong><\/td><td>Double-sided PEI<\/td><td>Double-sided PEI<\/td><\/tr><tr><td><strong>Physical dimensions<\/strong><\/td><td>441.5\u00d7445.3\u00d7461.3 mm<\/td><td>430\u00d7430\u00d7470 mm approx.<\/td><\/tr><tr><td><strong>Net weight<\/strong><\/td><td>9.5 kg<\/td><td>~8.5 kg<\/td><\/tr><tr><td><strong>Rated power<\/strong><\/td><td>1450 W<\/td><td>~1000 W<\/td><\/tr><tr><td><strong>Official materials<\/strong><\/td><td><strong>PLA, PETG, ASA, TPU, PVA, PLA-CF, PETG-CF<\/strong><\/td><td>PLA, PETG, ABS, ASA, PET, PA, PC, PP, TPU<\/td><\/tr><tr><td><strong>Color expansion<\/strong><\/td><td><strong>Up to 19 (4\u00d7 ACE 2 Pro)<\/strong><\/td><td>Up to 8 (2\u00d7 ACE Pro)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Unboxing and setup of the Anycubic Kobra X<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"box-sizing: border-box; margin: 0px; padding: 0px;\">Let&#8217;s start with&nbsp;<strong>our experience with the Anycubic Kobra X: unboxing and setup<\/strong>.<\/span><\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-style-zoooom\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"233\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-29-1024x233.png\" alt=\"- - -\" class=\"wp-image-40619\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-29-1024x233.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-29-300x68.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-29-768x175.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-29-1536x350.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-29-450x102.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-29-780x177.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-29.png 1582w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The first impression when unboxing is good. The <strong>Kobra X arrives well protected with rigid foam that keeps all components properly protected during transport<\/strong>, and from the very first contact it is clear that this is a solid and heavy machine for its size.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Printer base and gantry frame (two main modules)<\/li>\n\n\n\n<li>Double-sided PEI print plate<\/li>\n\n\n\n<li>2 spool holders + 4 spool barrels<\/li>\n\n\n\n<li>4 PTFE (Teflon) tubes<\/li>\n\n\n\n<li>Purge wiper with M3\u00d78 screw and cable clips<\/li>\n\n\n\n<li>Set of hex keys (4.0 \/ 2.5 \/ 2.0 mm)<\/li>\n\n\n\n<li>Magnet, lubricating grease, nozzle cleaner and application brush<\/li>\n\n\n\n<li>Power cable + decorative covers<\/li>\n\n\n\n<li>Printed user manual<\/li>\n\n\n\n<li>PLA filament sample<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"347\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-27-1024x347.png\" alt=\"- - -\" class=\"wp-image-40591\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-27-1024x347.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-27-300x102.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-27-768x260.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-27-450x153.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-27-780x264.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-27.png 1298w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>included tool kit is functional and covers everything needed for assembly and basic maintenance<\/strong>. The filament sample, though small, is sufficient for the first test print. A plus: it includes lubricating grease, something not always found in the box of machines in this price range.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The Kobra X arrives partially assembled: the base and the gantry are the two main modules that need to be joined. The complete process takes between 20 and 60 minutes depending on the user&#8217;s experience.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-style-zoooom\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"464\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-30-1024x464.png\" alt=\"- - -\" class=\"wp-image-40623\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-30-1024x464.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-30-300x136.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-30-768x348.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-30-1536x696.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-30-450x204.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-30-780x354.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-30.png 1584w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Main assembly steps:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Place the PEI plate<\/strong> on the heated bed<\/li>\n\n\n\n<li><strong>Critical step<\/strong>: remove the 6 screws from the X-axis shipping brackets (3 on each side) <em>before<\/em> turning on the machine. Skipping this step can damage the X axis.<\/li>\n\n\n\n<li><strong>Join the XZ bridge and base<\/strong> with 8 M5\u00d730 screws (four per side)<\/li>\n\n\n\n<li>Tilt the printer to <strong>connect the labeled cables (X, Z, printhead and camera) on the underside of the base<\/strong>, and fit the cable cover<\/li>\n\n\n\n<li><strong>Install the purge wiper on the left side<\/strong>, mount the spool holders on top and connect the PTFE tubes<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">The printed manual is clear enough to follow the process. The cables are labeled, which reduces the chance of connection errors. We also leave you the official Anycubic assembly video below.<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"Kobra X-Unboxing\" width=\"1170\" height=\"658\" src=\"https:\/\/www.youtube.com\/embed\/Nx5xIAFtu7s?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Once assembled, we connect the power cable and <strong>turn on the printer, which launches a guided setup wizard<\/strong> that includes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>LeviQ 3.0 automatic leveling (49-point mesh)<\/li>\n\n\n\n<li>Resonance compensation (input shaping)<\/li>\n\n\n\n<li>Active noise reduction (phase stepping on motors)<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-image size-large is-style-zoooom\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"645\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-32-1024x645.png\" alt=\"- - -\" class=\"wp-image-40627\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-32-1024x645.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-32-300x189.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-32-768x484.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-32-1536x967.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-32-450x283.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-32-780x491.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-32.png 1582w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>complete process takes between 15 and 20 minutes<\/strong> and only needs to be repeated if the machine is moved or adhesion issues arise. In normal use, the initial calibration holds up through many sessions without needing to be repeated.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Once finished, we could not resist loading the filaments and running one of the test prints included on the printer itself \u2014 printing went without any issues.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"254\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-34-1024x254.png\" alt=\"- - -\" class=\"wp-image-40631\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-34-1024x254.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-34-300x74.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-34-768x190.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-34-1536x381.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-34-450x112.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-34-780x193.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-34.png 1582w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The official slicer is <strong>Anycubic Slicer Next<\/strong>, built on top of OrcaSlicer and BambuStudio. It includes optimized profiles for the ACE Gen 2 system with color channel management and access to the Maker Online model library.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"838\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-36-1024x838.png\" alt=\"- - -\" class=\"wp-image-40635\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-36-1024x838.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-36-300x246.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-36-768x629.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-36-1536x1258.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-36-450x368.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-36-780x639.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-36.png 1573w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">For users who prefer OrcaSlicer, Anycubic profiles can be imported and used via LAN mode. There is no official native profile in the standard version of OrcaSlicer at this time, but one is expected to arrive in future updates. Cura and PrusaSlicer are mentioned in the manual as compatible, but official profiles for these slicers were not available at the time of this test.<\/p>\n\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-f355898\" data-v=\"2\" data-block-id=\"f355898\"><style>.stk-f355898 {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;margin-bottom:0px !important;}.stk-f355898 .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-f355898-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-9228b93\" data-block-id=\"9228b93\"><style>.stk-9228b93 {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-d298c07\" data-block-id=\"d298c07\"><style>.stk-d298c07 .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-d298c07 .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#0693e3 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-d298c07\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-d-298-c-07-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-d-298-c-07-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M256 8C119.043 8 8 119.083 8 256c0 136.997 111.043 248 248 248s248-111.003 248-248C504 119.083 392.957 8 256 8zm0 110c23.196 0 42 18.804 42 42s-18.804 42-42 42-42-18.804-42-42 18.804-42 42-42zm56 254c0 6.627-5.373 12-12 12h-88c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h12v-64h-12c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h64c6.627 0 12 5.373 12 12v100h12c6.627 0 12 5.373 12 12v24z\"\/><\/svg><\/div><\/span><\/div>\n\n\n<div class=\"wp-block-stackable-heading aligncenter stk-block-heading stk-block-heading--v2 stk-block stk-3029a3c\" id=\"strong-strong-strong-la-importancia-del-ajuste-del-enfoque-del-laser-strong-strong-strong-br-es-importante-strong-recalcar-que-cuanto-mas-pequeno-sea-el-foco-mayor-sera-la-precision-y-mejor-el-resultado-strong-br-por-otro-lado-recordar-que-strong-imperativo-reajustar-el-enfoque-strong-strong-cada-vez-que-se-graben-objetos-de-diferentes-alturas-o-incluso-de-diferentes-materiales-strong-br-un-enfoque-impreciso-puede-llevar-a-grabados-fallidos-o-de-muy-baja-calidad\" data-block-id=\"3029a3c\"><p class=\"stk-block-heading__text\"><strong>Which slicer should you use?<\/strong><br>For new users, start with Anycubic Slicer Next. For advanced users already familiar with OrcaSlicer, importing the official profiles is the most convenient option until native profiles are available.<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Analysis and hands-on experience with the Anycubic Kobra X<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">At this point we have the machine ready and the slicer set up to start creating our projects and put the <strong>Anycubic Kobra X<\/strong> to work.<\/p>\n\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-783b14a\" data-v=\"2\" data-block-id=\"783b14a\"><style>.stk-783b14a {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;margin-bottom:0px !important;}.stk-783b14a .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-783b14a-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-c062783\" data-block-id=\"c062783\"><style>.stk-c062783 {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-bfbc299\" data-block-id=\"bfbc299\"><style>.stk-bfbc299 .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-bfbc299 .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#0693e3 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-bfbc299\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-bfbc-299-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-bfbc-299-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M256 8C119.043 8 8 119.083 8 256c0 136.997 111.043 248 248 248s248-111.003 248-248C504 119.083 392.957 8 256 8zm0 110c23.196 0 42 18.804 42 42s-18.804 42-42 42-42-18.804-42-42 18.804-42 42-42zm56 254c0 6.627-5.373 12-12 12h-88c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h12v-64h-12c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h64c6.627 0 12 5.373 12 12v100h12c6.627 0 12 5.373 12 12v24z\"\/><\/svg><\/div><\/span><\/div>\n\n\n\n<div class=\"wp-block-stackable-heading aligncenter stk-block-heading stk-block-heading--v2 stk-block stk-0253482\" id=\"strong-strong-strong-la-importancia-del-ajuste-del-enfoque-del-laser-strong-strong-strong-br-es-importante-strong-recalcar-que-cuanto-mas-pequeno-sea-el-foco-mayor-sera-la-precision-y-mejor-el-resultado-strong-br-por-otro-lado-recordar-que-strong-imperativo-reajustar-el-enfoque-strong-strong-cada-vez-que-se-graben-objetos-de-diferentes-alturas-o-incluso-de-diferentes-materiales-strong-br-un-enfoque-impreciso-puede-llevar-a-grabados-fallidos-o-de-muy-baja-calidad\" data-block-id=\"0253482\"><p class=\"stk-block-heading__text\"><strong>3Dwork settings:<\/strong><br>During our review, and to simulate a typical user as closely as possible, we used Anycubic Slicer Next as our slicer, using the default profile for the Kobra X as a starting point.<br><img decoding=\"async\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-37-1024x212.png\" alt=\"- - -\" title=\"- -\"><br>To get better results, as we always recommend, we ran basic tests directly from the slicer: temperature, flow, PA, retractions and tolerance tests are the ones we advise you to run with any filament, so you end up with a profile that gets the most out of your printer.<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">The first test we ran could only have one goal: seeing how the ACE Gen 2 behaves, checking its reliability and finding out whether the color\/material changes truly reduce printing time and waste significantly, and&#8230;<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"254\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-38-1024x254.png\" alt=\"- - -\" class=\"wp-image-40639\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-38-1024x254.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-38-300x75.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-38-768x191.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-38-1536x382.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-38-450x112.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-38-780x194.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-38.png 1582w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">&#8230; the reality was a bit bittersweet. <strong>While filament changes and purge waste have been reduced considerably, they are still, in our view, quite significant<\/strong>. It is something inherent to this type of technology, but it is a clear step forward from Anycubic: the reduction in time and material has been approximately 30% compared to similar machines.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Dimensional accuracy results are what you would expect from this price range: within a \u00b10.1\u20130.2 mm margin across all three axes, with no noticeable tendency to expand or contract on any particular axis. Functional parts with moderate tolerances come out right on the first try without needing to adjust the scale factor.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"255\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-39-1024x255.png\" alt=\"- - -\" class=\"wp-image-40641\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-39-1024x255.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-39-300x75.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-39-768x191.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-39-1536x382.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-39-450x112.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-39-780x194.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-39.png 1583w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">It is worth highlighting that first layer results are one of the strongest points of the Kobra X. The <strong>49-point LeviQ 3.0 system does an excellent job compensating for bed variations<\/strong>. In our tests, adhesion was consistent across the entire surface (corners, center and sides) without needing any additional Z-offset adjustments after the initial calibration. A result that does not always happen even on higher-priced machines.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"459\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40-1024x459.png\" alt=\"- - -\" class=\"wp-image-40643\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40-1024x459.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40-300x134.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40-768x344.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40-1536x689.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40-450x202.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40-780x350.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40-1600x717.png 1600w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-40.png 1711w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">With the stock profile, the Kobra X handles overhangs cleanly up to approximately 45\u201350\u00b0. Beyond that, layer cooling starts to become the limiting factor, as with any bedslinger of this type. Slicer handling of steep overhangs is correct with the stock profile and does not require manual adjustments for general use.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Another very important aspect to keep in mind for multicolor printing is correctly adjusting the purge volumes between filaments. While the slicer estimates some values, these are not always optimal, as they depend heavily on the pigments and color combinations used.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The following example shows the difference between a default print with tinted parts and an optimal purge volume adjustment using specific tests for that purpose.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"452\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-35-1024x452.png\" alt=\"- - -\" class=\"wp-image-40633\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-35-1024x452.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-35-300x132.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-35-768x339.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-35-1536x678.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-35-450x199.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-35-780x344.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-35.png 1582w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">We would like to take a closer look at the <strong>ACE Gen 2<\/strong>, which is the technical heart of the <strong>Kobra X<\/strong> and deserves a detailed explanation, because its mechanism is genuinely different from any multicolor system we have reviewed in this price range.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The ACE Gen 2 filament selector is based on a <strong>camshaft driven by a worm gear<\/strong>. The camshaft has two lobes positioned <strong>72\u00b0 apart<\/strong>, and as it rotates it controls four independent tensioners arranged in a <em>dual-layer extrusion<\/em> system. Each tensioner corresponds to one of the four filament channels.<\/p>\n\n\n\n<figure class=\"wp-block-video\"><video autoplay controls loop muted src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/07\/mp4\/kx-4-1.mp4\" playsinline><\/video><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">When the firmware orders a color change, the worm gear rotates the camshaft until the corresponding lobe presses the tensioner of the next active channel, engaging that channel and releasing the previous one. All of this happens inside the toolhead itself, with no need to move any external box or send signals to a remote unit. It is a mechanically simple but highly effective design: few moving parts, low wear and high selection speed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Completing the system is a <strong>direction-changing mechanism<\/strong> that guides the selected filament downward, directly into the hotend, with a minimal travel distance. It is precisely this architecture that allows reducing the retraction required on each change to just 30 mm.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">One of the least mentioned but most important components of the ACE Gen 2 is the <strong>filament cutter integrated into the toolhead<\/strong> (<em>Hotend Cutter Assembly<\/em>). Before each color change, the toolhead moves to a specific position in the purge zone and performs a cut of the active filament. The cutting mechanism is triggered by the toolhead&#8217;s own movement as it presses against a specific position on the rail, with no additional actuators.<\/p>\n\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-deee691\" data-v=\"2\" data-block-id=\"deee691\"><style>.stk-deee691 {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;margin-bottom:0px !important;}.stk-deee691 .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-deee691-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-fb4ebe3\" data-block-id=\"fb4ebe3\"><style>.stk-fb4ebe3 {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-f794b57\" data-block-id=\"f794b57\"><style>.stk-f794b57 .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-f794b57 .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#0693e3 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-f794b57\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-f-794-b-57-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-f-794-b-57-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M256 8C119.043 8 8 119.083 8 256c0 136.997 111.043 248 248 248s248-111.003 248-248C504 119.083 392.957 8 256 8zm0 110c23.196 0 42 18.804 42 42s-18.804 42-42 42-42-18.804-42-42 18.804-42 42-42zm56 254c0 6.627-5.373 12-12 12h-88c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h12v-64h-12c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h64c6.627 0 12 5.373 12 12v100h12c6.627 0 12 5.373 12 12v24z\"\/><\/svg><\/div><\/span><\/div>\n\n\n\n<div class=\"wp-block-stackable-heading aligncenter stk-block-heading stk-block-heading--v2 stk-block stk-4a772a5\" id=\"strong-strong-strong-la-importancia-del-ajuste-del-enfoque-del-laser-strong-strong-strong-br-es-importante-strong-recalcar-que-cuanto-mas-pequeno-sea-el-foco-mayor-sera-la-precision-y-mejor-el-resultado-strong-br-por-otro-lado-recordar-que-strong-imperativo-reajustar-el-enfoque-strong-strong-cada-vez-que-se-graben-objetos-de-diferentes-alturas-o-incluso-de-diferentes-materiales-strong-br-un-enfoque-impreciso-puede-llevar-a-grabados-fallidos-o-de-muy-baja-calidad\" data-block-id=\"4a772a5\"><p class=\"stk-block-heading__text\"><strong>What is the cutter for?<br><\/strong>It serves two purposes: first, to ensure the filament tip is clean and free of deformations before retracting it, which prevents it from jamming when re-entering the channel. Second, to condition the filament end so that the next load goes in smoothly. Without this prior cut, repeated retractions would progressively deform the tip and cause jams in the channels.<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">What is the cutter for? It serves two purposes: first, to ensure the filament tip is clean and free of deformations before retracting it, which prevents it from jamming when re-entering the channel. Second, to condition the filament end so that the next load goes in smoothly. Without this prior cut, repeated retractions would progressively deform the tip and cause jams in the channels.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The complete cycle takes between <strong>35 and 42 seconds<\/strong> under normal conditions. To understand why this matters: a system with an external box like the ACE Pro on the Kobra 3 performs retractions of 160 mm or more, which not only takes longer but also generates far more purge filament with each transition. With 776 color changes in a long session, the cumulative difference in time and material is very significant.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The ACE Gen 2 manages filament differently depending on the scenario, and it is important to understand the difference:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>End of filament with the same color available on another channel (Filament Backup):<\/strong><br>When the <em>Filament Backup<\/em> function is enabled and two spools of the same material and color are loaded on different channels, the system detects depletion via the optical sensor on the active channel and automatically switches to the backup channel. Here is the key point: since it is the same color, <strong>no purge cycle is executed<\/strong>. The change is practically transparent to the printed part. Printing continues without pauses or additional waste. This is one of the most practical features of the system for long sessions with a single color.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>End of filament with a different color on the backup channel:<\/strong><br>If the filament runs out and the backup channel contains a different color, the system executes the full change cycle with cut, retraction and purge. The final result on the part will depend on where in the print the change occurs, so for critical single-color parts it is worth making sure the backup channel has exactly the same filament.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Filament break mid-channel:<\/strong><br>If the filament breaks inside the channel (not at the spool but in the PTFE tube or the mechanism itself), the system triggers <strong>error 10107<\/strong>. In this case, recovery requires manual intervention: remove the broken piece of filament, manually reload the channel and resume printing. This is the most tedious scenario and the way to prevent it is to always cut the filament at 45\u00b0 before loading it and to avoid spools with tangles.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Retraction failure on a channel (error 11854):<\/strong><br>We documented this error during testing, specifically on channel 4. It occurs when the system attempts to retract the filament and the sensor does not confirm that the retraction has completed correctly. The usual fix is to unload and reload the filament on the affected channel. It is not a frequent error, but it is worth knowing about it.<\/li>\n\n\n\n<li><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">In addition, <strong>the ACE Gen 2 incorporates an adaptive extrusion force compensator that adjusts the pressure applied to the filament based on the material detected in each channel<\/strong>. This is what <strong>allows mixing materials of different hardness in the same part (such as rigid PLA and flexible TPU 68D) without having to manually recalibrate the extruder tension on each change<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The system measures the filament advance resistance and adjusts the motor torque accordingly. In tests with PLA + TPU it worked without issues, although results with more extreme materials (high viscosity, very soft filaments) depend on the configured slicer profile.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Below you will find a table summarizing the tests we ran with different sizes:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"447\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41-1024x447.png\" alt=\"- - -\" class=\"wp-image-40645\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41-1024x447.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41-300x131.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41-768x335.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41-1536x671.png 1536w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41-450x196.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41-780x341.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41-1600x698.png 1600w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-41.png 1702w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Material<\/th><th>Hotend temp.<\/th><th>Bed temp.<\/th><th>Result<\/th><th>Notes<\/th><\/tr><\/thead><tbody><tr><td>Standard PLA<\/td><td>220\u00b0C<\/td><td>60\u00b0C<\/td><td>\u2605\u2605\u2605\u2605\u2605<\/td><td>Excellent across the full speed range<\/td><\/tr><tr><td>PETG<\/td><td>240\u00b0C<\/td><td>80\u00b0C<\/td><td>\u2605\u2605\u2605\u2605\u2606<\/td><td>Good adhesion, retraction needs slight adjustment<\/td><\/tr><tr><td>ABS<\/td><td>250\u00b0C<\/td><td>\u2264100\u00b0C<\/td><td>\u2605\u2605\u2605\u2606\u2606<\/td><td>Not on Anycubic&#8217;s official materials list; variable results without enclosure and depending on part size.<\/td><\/tr><tr><td>ASA<\/td><td>255\u00b0C<\/td><td>\u2264100\u00b0C<\/td><td>\u2605\u2605\u2605\u2606\u2606<\/td><td>Maximum bed temperature at the limit; variable results without enclosure and depending on part size.<\/td><\/tr><tr><td>TPU 95A<\/td><td>230\u00b0C<\/td><td>40\u00b0C<\/td><td>\u2605\u2605\u2605\u2605\u2606<\/td><td>Direct drive handles TPU 95A well<\/td><\/tr><tr><td>TPU 85A<\/td><td>225\u00b0C<\/td><td>40\u00b0C<\/td><td>\u2605\u2605\u2605\u2605\u2606<\/td><td>Worked well in testing although not initially recommended.<\/td><\/tr><tr><td>PVA<\/td><td>215\u00b0C<\/td><td>60\u00b0C<\/td><td>\u2605\u2605\u2605\u2605\u2606<\/td><td>Excellent as soluble support with PLA; requires pre-drying and a sealed spool to prevent moisture absorption. Not suitable for simultaneous multicolor use with TPU<\/td><\/tr><tr><td>PLA-CF<\/td><td>230\u00b0C<\/td><td>60\u00b0C<\/td><td>\u2605\u2605\u2605\u2605\u2605<\/td><td>Hardened steel nozzle included as standard, no wear<\/td><\/tr><tr><td>PETG-CF<\/td><td>245\u00b0C<\/td><td>85\u00b0C<\/td><td>\u2605\u2605\u2605\u2605\u2606<\/td><td>Solid results on functional parts<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-3662d3a\" data-v=\"2\" data-block-id=\"3662d3a\"><style>.stk-3662d3a {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;margin-bottom:0px !important;}.stk-3662d3a .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-3662d3a-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-0893abb\" data-block-id=\"0893abb\"><style>.stk-0893abb {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-d51fc9d\" data-block-id=\"d51fc9d\"><style>.stk-d51fc9d .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-d51fc9d .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#0693e3 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-d51fc9d\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-d-51-fc-9-d-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-d-51-fc-9-d-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M256 8C119.043 8 8 119.083 8 256c0 136.997 111.043 248 248 248s248-111.003 248-248C504 119.083 392.957 8 256 8zm0 110c23.196 0 42 18.804 42 42s-18.804 42-42 42-42-18.804-42-42 18.804-42 42-42zm56 254c0 6.627-5.373 12-12 12h-88c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h12v-64h-12c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h64c6.627 0 12 5.373 12 12v100h12c6.627 0 12 5.373 12 12v24z\"\/><\/svg><\/div><\/span><\/div>\n\n\n\n<div class=\"wp-block-stackable-heading aligncenter stk-block-heading stk-block-heading--v2 stk-block stk-e68cf36\" id=\"strong-strong-strong-la-importancia-del-ajuste-del-enfoque-del-laser-strong-strong-strong-br-es-importante-strong-recalcar-que-cuanto-mas-pequeno-sea-el-foco-mayor-sera-la-precision-y-mejor-el-resultado-strong-br-por-otro-lado-recordar-que-strong-imperativo-reajustar-el-enfoque-strong-strong-cada-vez-que-se-graben-objetos-de-diferentes-alturas-o-incluso-de-diferentes-materiales-strong-br-un-enfoque-impreciso-puede-llevar-a-grabados-fallidos-o-de-muy-baja-calidad\" data-block-id=\"e68cf36\"><p class=\"stk-block-heading__text\"><strong><strong>PVA as soluble support:<\/strong><\/strong><br>One of the most practical advantages of the ACE Gen 2 is the ability to use PVA as a water-soluble support material in combination with PLA. <br>The system automatically switches between PLA (part) and PVA (support) during printing, with no user intervention. The result is parts with complex geometries (impossible overhangs, internal cavities) where the support dissolves in warm water without leaving any marks. <br>PVA requires pre-drying if the spool has been exposed to humidity: 8-10 hours at 45 \u00b0C is the standard recommended by Anycubic. If you print without drying, bubbles appear in the extrusion and layer adhesion suffers.<br><video autoplay=\"\" controls=\"\" loop=\"\" muted=\"\" src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/05\/mp4\/kx-8-PVA-PLA.mp4\" playsinline=\"\"><\/video><br>The <a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/faq\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">official Anycubic FAQ<\/a> has additional information on drying and handling hygroscopic materials.<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<p class=\"wp-block-paragraph\">The Kobra X generally stays <strong>below 48 dB<\/strong> during normal printing, dropping to <strong>45 dB in silent mode<\/strong> thanks to active noise reduction on the motor drivers (phase stepping). For a bedslinger of this size and speed, those are solid numbers.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"415\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-33-1024x415.png\" alt=\"- - -\" class=\"wp-image-40629\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-33-1024x415.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-33-300x122.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-33-768x311.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-33-450x182.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-33-780x316.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-33.png 1054w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">As for power consumption, the rated wattage is <strong>1450 W<\/strong>, high for this segment but consistent with the system&#8217;s size (printer + ACE system). The DC-powered bed is somewhat slower to reach high temperatures compared to AC systems, but in normal use this is not a real problem.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">During our tests, the machine completed hours of printing without significant hardware failures. The only specific error documented during testing was <strong>error 11854<\/strong> related to channel 4 retraction failures, which appeared occasionally and was resolved by reloading the filament.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The 720p HD camera at 10 fps has a structural drawback: the viewing angle points downward and the print head obstructs the view of the first layers until the part reaches at least 40-50 mm in height. <\/p>\n\n\n\n<figure class=\"wp-block-video\"><video autoplay controls loop muted src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/05\/mp4\/kx-16-1.mp4\" playsinline><\/video><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Spaghetti detection works once the part has enough height to be visible, but not in the first layers where it would be most useful. It does include a physical privacy cover, which is a welcome touch.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"356\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-26-1024x356.png\" alt=\"- - -\" class=\"wp-image-40589\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-26-1024x356.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-26-300x104.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-26-768x267.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-26-450x156.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-26-780x271.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-26.png 1424w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Final verdict on the Anycubic Kobra X<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>Kobra X is the logical evolution of the Kobra 3<\/strong>. The integrated ACE Gen 2 in the printhead is not a gimmick: in real multicolor printing, reducing retractions from 160 mm to 30 mm translates into less waste, less time between color changes, and greater reliability during long sessions. If you already own a Kobra 3, or any other multicolor printer, and <strong>you do a lot of multicolor printing&#8230; the Kobra X justifies the upgrade and the investment quickly<\/strong>. <br>If you are buying your first Anycubic multicolor printer, the Kobra X is one of the most advisable options in the current catalog for this machine segment.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-42-1024x576.png\" alt=\"- - -\" class=\"wp-image-41086\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-42-1024x576.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-42-300x169.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-42-768x432.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-42-450x253.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-42-780x439.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-42.png 1280w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The quick-release nozzle system combined with direct access to the printhead simplifies maintenance. The 3.5&#8243; touchscreen covers most needs without having to rely on the app, which is always helpful. Tangle detection and the filament runout sensor work reliably. And LAN mode is a bonus for environments that prioritize privacy.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The OrcaSlicer project is generating some very interesting derivative projects. The most relevant one for the Kobra X is the <strong><a href=\"https:\/\/github.com\/ratdoux\/OrcaSlicer-FullSpectrum\" target=\"_blank\" rel=\"noopener nofollow\" class=\"external\">Full Spectrum<\/a><\/strong> fork (initially developed for printers from other brands), which <strong>introduces color-mixing capability through the CMYK model: with just 4 filaments (cyan, magenta, yellow and black), the system calculates the necessary purge mixes to reproduce virtually any color in the printed part<\/strong>.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"454\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-43-1024x454.png\" alt=\"- - -\" class=\"wp-image-41088\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-43-1024x454.png 1024w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-43-300x133.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-43-768x341.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-43-450x200.png 450w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-43-780x346.png 780w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-43.png 1080w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">This feature is not in the official OrcaSlicer or in Anycubic Slicer Next at this time. The ACE Gen 2 architecture of the Kobra X (with short retractions and fast color changes) makes it a technically suitable candidate for this type of printing if support arrives in the official slicer or through a custom profile in OrcaSlicer.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We cannot confirm that Anycubic has plans to implement this feature. What we can say is that the community is moving in that direction and that the Kobra X has the hardware to support it. This is something worth watching closely over the coming months.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Moving on to <strong>the firmware side, the Kobra X runs Anycubic&#8217;s Kobra OS, which is based on Klipper<\/strong>, which in theory opens up the customization possibilities typical of this firmware. In practice, Anycubic has opted for a closed and limited system: <strong>the source code is not available<\/strong> and no user-editable Klipper profiles are published. This decision has drawn justified criticism from the open source community.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For the average user, the impact is minimal: the machine works well with the stock firmware and updates OTA. For the advanced user who wants to customize Klipper parameters, modify macros, or integrate the printer into their own Moonraker server, the Kobra X is not the right choice today. We hope Anycubic reconsiders this position with future updates.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you follow us regularly you will have seen <strong>Rinkhals<\/strong>, a <strong>custom firmware overlay for the Anycubic Kobra range, developed by the community, that adds features such as Mainsail access, native OrcaSlicer, and Klipper customization without depending on Anycubic&#8217;s closed ecosystem<\/strong>.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"772\" height=\"341\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-44.png\" alt=\"- - -\" class=\"wp-image-41090\" title=\"- -\" srcset=\"https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-44.png 772w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-44-300x133.png 300w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-44-768x339.png 768w, https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/image-44-450x199.png 450w\" sizes=\"auto, (max-width: 772px) 100vw, 772px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The relevant news for those considering the Kobra X is that, <strong>as of the date of this review (March 2026), Rinkhals does not officially support the Kobra X<\/strong>. The list of compatible devices includes the Kobra 3, Kobra 3 Max, Kobra S1, and some Kobra 2 Pro models, but not the Kobra X. The community is tracking the evolution of the machine and support in the future cannot be ruled out, especially if Anycubic maintains its closed-code policy and demand for alternatives grows.<\/p>\n\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-79a3cc6\" data-v=\"2\" data-block-id=\"79a3cc6\"><style>.stk-79a3cc6 {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;}.stk-79a3cc6-container{background-color:#fff6f0 !important;}.stk-79a3cc6-container:before{background-color:#fff6f0 !important;}.stk-79a3cc6 .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-79a3cc6-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-29a585b\" data-block-id=\"29a585b\"><style>.stk-29a585b {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-8a30750\" data-block-id=\"8a30750\"><style>.stk-8a30750 .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-8a30750 .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#ff6900 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-8a30750\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-8-a-30750-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-8-a-30750-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 576 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M569.517 440.013C587.975 472.007 564.806 512 527.94 512H48.054c-36.937 0-59.999-40.055-41.577-71.987L246.423 23.985c18.467-32.009 64.72-31.951 83.154 0l239.94 416.028zM288 354c-25.405 0-46 20.595-46 46s20.595 46 46 46 46-20.595 46-46-20.595-46-46-46zm-43.673-165.346l7.418 136c.347 6.364 5.609 11.346 11.982 11.346h48.546c6.373 0 11.635-4.982 11.982-11.346l7.418-136c.375-6.874-5.098-12.654-11.982-12.654h-63.383c-6.884 0-12.356 5.78-11.981 12.654z\"\/><\/svg><\/div><\/span><\/div>\n\n\n\n<div class=\"wp-block-stackable-heading stk-block-heading stk-block-heading--v2 stk-block stk-8b6ceee\" id=\"strong-strong-strong-sobre-nuestra-metodologia-de-review-de-productos-strong-strong-strong\" data-block-id=\"8b6ceee\"><p class=\"stk-block-heading__text\"><strong><strong><strong>ABOUT OUR PRODUCT REVIEW METHODOLOGY<\/strong><\/strong><\/strong><\/p><\/div>\n<\/div><\/div>\n\n\n\n<div class=\"wp-block-stackable-text stk-block-text stk-block stk-0bc9426\" data-block-id=\"0bc9426\"><style>.stk-0bc9426 {border-top-left-radius:0px !important;border-top-right-radius:0px !important;border-bottom-right-radius:0px !important;border-bottom-left-radius:0px !important;overflow:hidden !important;margin-bottom:0px !important;}<\/style><p class=\"stk-block-text__text\">This <strong>review of the <strong>Anycubic Kobra X<\/strong> was carried out with a unit provided by Anycubic<\/strong>.<\/p><\/div>\n\n\n\n<div class=\"wp-block-stackable-text stk-block-text stk-block stk-b4ca971\" data-block-id=\"b4ca971\"><style>.stk-b4ca971 {margin-bottom:0px !important;}<\/style><p class=\"stk-block-text__text\"><strong><strong><strong>Anycubic provided us with this printer without influencing the content in any way. Our evaluation and observations are based entirely on our experience during the tests carried out with the unit over the testing period used to ensure we deliver an accurate assessment, from our perspective, of the product.<\/strong><\/strong><\/strong><\/p><\/div>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>At 3Dwork we are always committed to transparency and honesty in our product reviews to ensure our audience can trust the content we produce.<\/strong><\/p>\n<\/div><\/div>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Where to buy the <strong>Anycubic Kobra X<\/strong>?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"><strong>Anycubic<\/strong>&nbsp;has the&nbsp;<strong>Anycubic Kobra X<\/strong>&nbsp;in its online store<\/span>, where you can buy the printer directly, along with accessories, spare parts and consumables&#8230; although it is currently still on pre-order, they are already shipping units as soon as they become available.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In any case, here are some links to their official store and other reference retailers:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td class=\"has-text-align-center\" data-align=\"center\"><strong><strong>Anycubic Kobra X<\/strong><\/strong><br><img decoding=\"async\" src=\"https:\/\/cdn-acop.makeronline.com\/asop\/2026-01\/05\/png\/kx.png\" alt=\"- - -\" title=\"- -\"><\/td><td><a href=\"https:\/\/store.anycubic.com\/products\/kobra-x?ref=lqhffvtf&amp;_sasdk=dMTljZTI2OTk5YjE4MTEtMGUwYjcyYjBkOGUxNGYtMWE1MjU2MzEtNDk1MzYwMC0xOWNlMjY5OTliMmI2Yw\" target=\"_blank\" data-type=\"link\" data-id=\"https:\/\/store.anycubic.com\/products\/kobra-3-combo\" rel=\"noreferrer noopener sponsored nofollow\" class=\"external\"><img decoding=\"async\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2023\/07\/anycubic_logo.png\" alt=\"- - -\" title=\"- -\"><\/a><\/td><td><a href=\"https:\/\/s.click.aliexpress.com\/e\/_c3Yg91GX\" target=\"_blank\" data-type=\"link\" data-id=\"https:\/\/s.click.aliexpress.com\/e\/_c3Yg91GX\" rel=\"noreferrer noopener sponsored nofollow\" class=\"external\"><img decoding=\"async\" src=\"https:\/\/3dwork.io\/wp-content\/uploads\/2025\/01\/image-73.png\" alt=\"- - -\" title=\"- -\"><\/a><\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<div class=\"wp-block-stackable-icon-box stk-block-icon-box stk-block stk-577093c\" data-v=\"2\" data-block-id=\"577093c\"><style>.stk-577093c {padding-top:0px !important;padding-right:0px !important;padding-bottom:0px !important;padding-left:0px !important;}.stk-577093c .stk-block-icon-box__content{padding-top:16px !important;padding-right:16px !important;padding-bottom:16px !important;padding-left:16px !important;}<\/style><div class=\"stk-block-content stk-inner-blocks stk-block-icon-box__content stk-container stk-577093c-container stk-hover-parent\">\n<div class=\"wp-block-stackable-icon-label stk-block-icon-label stk-block stk-e26ae74\" data-block-id=\"e26ae74\"><style>.stk-e26ae74 {margin-bottom:0px !important;}<\/style><div class=\"stk-row stk-inner-blocks stk-block-content\">\n<div class=\"wp-block-stackable-icon stk-block-icon has-text-align-left stk-block stk-14d740f\" data-block-id=\"14d740f\"><style>.stk-14d740f .stk--svg-wrapper .stk--inner-svg svg:last-child, .stk-14d740f .stk--svg-wrapper .stk--inner-svg svg:last-child :is(g, path, rect, polygon, ellipse){fill:#0693e3 !important;}<\/style><span class=\"stk--svg-wrapper\"><div class=\"stk--inner-svg\"><svg style=\"height:0;width:0\"><defs><linearGradient id=\"linear-gradient-14d740f\" x1=\"0\" x2=\"100%\" y1=\"0\" y2=\"0\"><stop offset=\"0%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-14-d-740-f-color-1)\"><\/stop><stop offset=\"100%\" style=\"stop-opacity:1;stop-color:var(--linear-gradient-14-d-740-f-color-2)\"><\/stop><\/linearGradient><\/defs><\/svg><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\" aria-hidden=\"true\" width=\"32\" height=\"32\"><path d=\"M256 8C119.043 8 8 119.083 8 256c0 136.997 111.043 248 248 248s248-111.003 248-248C504 119.083 392.957 8 256 8zm0 110c23.196 0 42 18.804 42 42s-18.804 42-42 42-42-18.804-42-42 18.804-42 42-42zm56 254c0 6.627-5.373 12-12 12h-88c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h12v-64h-12c-6.627 0-12-5.373-12-12v-24c0-6.627 5.373-12 12-12h64c6.627 0 12 5.373 12 12v100h12c6.627 0 12 5.373 12 12v24z\"\/><\/svg><\/div><\/span><\/div>\n\n\n<div class=\"wp-block-stackable-heading stk-block-heading stk-block-heading--v2 stk-block stk-77dbe67\" id=\"si-utilizas-los-links-de-compras-el-precio-del-producto-sera-el-mismo-que-si-accedes-de-manera-habitual-pero-a-strong-3-d-work-le-quedara-una-pequena-comision-strong-algo-que-nos-ayudara-a-soportar-el-proyecto-y-continuar-generando-contenido\" data-block-id=\"77dbe67\"><p class=\"stk-block-heading__text\">If you use the purchase links, the product price will be the same as if you access it directly, but <strong>3DWork will receive a small commission<\/strong>. This helps us support the project and keep generating content.<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Kobra X Maintenance<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Just as we always say that calibration tests and adjustments will help you get the most out of your machines, proper maintenance will keep that quality up and extend the printer&#8217;s lifespan.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Linear rail lubrication<\/strong>: every 100\u2013150 hours of use. Linear rails require quality lubricant (PTFE or lithium grease). The Kobra X itself includes grease in the box.<\/li>\n\n\n\n<li><strong>PEI bed cleaning<\/strong>: with 90%+ isopropyl alcohol before each session. Do not use harsh cleaners that could damage the coating.<\/li>\n\n\n\n<li><strong>Screw tightness check<\/strong>: especially on the gantry and bed screws, every 50\u2013100 hours. High-acceleration vibrations loosen them over time.<\/li>\n\n\n\n<li><strong>Nozzle replacement<\/strong>: with the Quick-Release system, no tools needed. Inspect the nozzle if excessive stringing or under-extrusion appears. When changing filament, also check the nozzle for wear.<\/li>\n\n\n\n<li><strong>ACE Gen 2 channel cleaning<\/strong>: if filament breaks inside the printhead, the disassembly process is tedious. Prevention: always cut the filament at 45\u00b0 before loading.<\/li>\n\n\n\n<li><strong>Purge Wiper<\/strong>: periodically check that the purge wiper does not accumulate filament residue that could interfere with scraping. If the wiper scrapes abnormally, clean with tweezers or compressed air and verify the deflector position.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Nozzle replacements and common spare parts are available through the official Anycubic store. The user community is beginning to have access to third-party alternatives for some components.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Official wiki: repair guides and technical support<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Anycubic maintains a <a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">comprehensive technical wiki for the Kobra X<\/a> with setup guides, component replacement instructions, and troubleshooting. It is the first resource to check before contacting support.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Getting started and usage guides:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/quick-start-guide\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Quick Start Guide<\/a>: assembly, first power-on, and initial calibration step by step<\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/filament-backup-guide\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Filament Backup Guide<\/a>: how to configure automatic spool switching with the same color<\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/tpu-printing-guide\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">TPU Printing Guide<\/a>: settings and specific recommendations for flexible filaments<\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/faq\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Official FAQ<\/a>: frequently asked questions directly from Anycubic<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>ACE Gen 2 system replacement guides:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/ace-gen2-printhead-assembly-replacement-guide\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">ACE GEN2 Printhead Assembly<\/a>: full replacement of the printhead assembly<\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/ace-gen2-shift-extruder-replacemen-guide\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">ACE GEN2 Shift Extruder<\/a>: replacement of the selector extruder<\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/strain-gauge\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">ACE GEN2 Hotend Cutter Assembly<\/a>: replacement of the integrated cutter<\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/filament-detection-board\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Printhead Filament Break Detection Board<\/a>: replacement of the filament break sensor<\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/nozzle-wiping-module-replacement-guide\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Nozzle Wiping Module<\/a>: replacement of the purge wiper module<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Mechanical and electronics replacement guides:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Quick-Release nozzle replacement, hotend and part cooling fans, touchscreen, heated bed, power supply, and mainboard<\/li>\n\n\n\n<li>Belt and motor guides for X, Y, and Z axes<\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/device-cannot-connect-to-the-network\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">WiFi\/Ethernet network troubleshooting<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/abnormal-scraping-of-filament-by-purge-wiper\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">Abnormal purge wiper scraping issue<\/a><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Common error codes<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The Kobra X displays numeric error codes on screen when it detects a problem. These are the most common ones during intensive multicolor use that you may find helpful:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Code<\/th><th>Description<\/th><th>Most common cause<\/th><th>Quick fix<\/th><\/tr><\/thead><tbody><tr><td><strong>10107<\/strong><\/td><td>Filament broken<\/td><td>Broken or depleted filament in the active channel<\/td><td>Remove filament fragment, manually reload the channel and resume<\/td><\/tr><tr><td><strong>10115<\/strong><\/td><td>USB disk problem<\/td><td>USB with capacity over 128 GB or incorrect format<\/td><td>Use a USB drive of \u2264128 GB formatted as FAT32<\/td><\/tr><tr><td><strong>10409<\/strong><\/td><td>Device operation abnormal<\/td><td>Internal communication error<\/td><td>Restart the printer; if it persists, check internal printhead connections<\/td><\/tr><tr><td><strong>11504<\/strong><\/td><td>Unknown filament in printhead<\/td><td>Unknown filament in the extruder; common when connecting the ACE 2 Pro<\/td><td>Unload and reload the filament in the affected channel; verify ACE 2 Pro connection<\/td><\/tr><tr><td><strong>11801<\/strong><\/td><td>Spaghetti detected<\/td><td>The camera detects (or thinks it detects) a spaghetti failure<\/td><td>If it is a false positive, adjust the detection sensitivity in print settings<\/td><\/tr><tr><td><strong>11816<\/strong><\/td><td>Z-axis motor anomaly<\/td><td>Problem with the Z-axis motor or cable<\/td><td>Restart; if it persists, check the Z cable connection at the base of the printer<\/td><\/tr><tr><td><strong>11819<\/strong><\/td><td>Motor cable fault<\/td><td>Poor contact or open circuit in the motor phase wiring<\/td><td>Check and reseat the connectors of the affected motor<\/td><\/tr><tr><td><strong>11842<\/strong><\/td><td>Filament clogging \/ entanglement<\/td><td>Filament tangled on the spool or clog in the channel<\/td><td>Pause, untangle the spool, resume; if there is a channel clog, unload and reload<\/td><\/tr><tr><td><strong>11854<\/strong><\/td><td>Retraction failure<\/td><td>Sensor does not confirm complete retraction of the channel (common in channel 4)<\/td><td>Unload and reload the filament in the affected channel<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The complete list of error codes with step-by-step resolution guides is available on the <a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">official Anycubic wiki for the Kobra X<\/a>.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently Asked Questions about the Anycubic Kobra X<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Is the Anycubic Kobra X suitable for beginners?<\/strong><br>With some nuance. The setup process is simpler than on traditional machines thanks to the automatic calibration wizard. However, the multicolor system adds a layer of complexity in filament loading and management that can be overwhelming for someone who has never used a 3D printer. For pure beginners, a single-color printer in the same price range would be more straightforward. For those who already have some experience and want to step into color printing, the Kobra X is a good entry point.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>What materials can I print with the Kobra X?<\/strong><br>With the stock hardened steel nozzle, the officially supported materials are: PLA, PETG, ASA, TPU (95A\/85A), PVA, PLA-CF, and PETG-CF. ABS is not on Anycubic&#8217;s official list for the Kobra X, although the hotend at 300 \u00b0C reaches a sufficient temperature to attempt it. For technical materials requiring a controlled environment, the lack of a closed housing is the limiting factor.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Can I print TPU with the Kobra X?<\/strong><br>Yes. The direct-drive extruder handles 95A TPU well officially. In our tests, 85A TPU also worked correctly. The ACE Gen 2 material mixing feature even allows combining PLA with TPU (68D) in the same part to achieve flexible and rigid zones. Anycubic has published an <a href=\"https:\/\/wiki.anycubic.com\/en\/fdm-3d-printer\/anycubic-kobra-x\/tpu-printing-guide\" target=\"_blank\" rel=\"nofollow noopener\" class=\"external\">official TPU printing guide for the Kobra X<\/a> with recommended speed, temperature, and retraction settings.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Which slicer works best with the Kobra X?<\/strong><br>For new users: Anycubic Slicer Next (official). For users already familiar with OrcaSlicer: import the official Anycubic profiles into OrcaSlicer via LAN mode. Profiles for Cura and PrusaSlicer were not officially available at the time of testing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Is the LeviQ 3.0 automatic leveling truly automatic?<\/strong><br>The 49-point compensation mesh is fully automatic and runs without any intervention. What still requires a one-time (and rarely repeated) manual adjustment is the initial Z-offset: the distance between the nozzle and the bed at the reference point. Once set correctly, the system maintains that reference reliably across many sessions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>What is the main difference between the Kobra X and the Kobra 3?<\/strong><br>The key difference lies in the multicolor system. The Kobra 3 uses the ACE Pro as an external box, with retractions of ~160 mm on each color change. The Kobra X integrates the ACE Gen 2 directly into the printhead, reducing those retractions to just 30 mm: less purge waste, faster changes, and better reliability during long multicolor sessions. In addition, the Kobra X scales up to 19 colors versus 8 on the Kobra 3, and gains slightly in build volume (260\u00d7260 vs 250\u00d7250 mm in XY).<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Is the Kobra X firmware updatable?<\/strong><br>Yes, via OTA updates from the touchscreen or the app. The firmware is based on Klipper, but Anycubic has not published the source code nor allows direct customization. Official updates have been regular to date. Note that Rinkhals, the alternative firmware popular in the Anycubic community, does not support the Kobra X as of March 2026.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Is the Kobra X compatible with the ACE 2 Pro?<\/strong><br>Yes, the Kobra X is compatible with the ACE 2 Pro. Up to four units can be connected to reach 19 simultaneous colors. The ACE 2 Pro also adds active filament drying. Important: the Kobra X <strong>is not compatible with the original ACE Pro<\/strong> from earlier versions (Kobra 3, Kobra S1). It only works with the ACE 2 Pro.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n","protected":false},"excerpt":{"rendered":"<p>Full test of the Kobra X: ACE Gen 2 integrated multicolor, 600 mm\/s, honest print quality over 3 months of daily use. Is the price justified? Read our complete review.<\/p>\n","protected":false},"author":6,"featured_media":40594,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_uag_custom_page_level_css":"","footnotes":""},"categories":[6084,6458,6503],"tags":[4355,5820,4360],"class_list":["post-41099","post","type-post","status-publish","format-standard","has-post-thumbnail","category-3d-printers-en","category-fdm-en","category-review-en","tag-analisis-en-2","tag-anycubic-en","tag-review-en-2"],"uagb_featured_image_src":{"full":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false],"thumbnail":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-150x150.webp",150,150,true],"medium":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-300x169.webp",300,169,true],"medium_large":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false],"large":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false],"1536x1536":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false],"2048x2048":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false],"pixwell_370x250":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-370x250.webp",370,250,true],"pixwell_370x250-2x":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false],"pixwell_370x250-3x":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false],"pixwell_280x210":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-280x210.webp",280,210,true],"pixwell_280x210-2x":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-560x366.webp",560,366,true],"pixwell_400x450":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-400x366.webp",400,366,true],"pixwell_400x600":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-400x366.webp",400,366,true],"pixwell_450x0":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png-450x253.webp",450,253,true],"pixwell_780x0":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false],"pixwell_780x0-2x":["https:\/\/3dwork.io\/wp-content\/uploads\/2026\/03\/ak7yXHqGzURoKB7LPiaEFK-650-80.png.webp",650,366,false]},"uagb_author_info":{"display_name":"JJR","author_link":"https:\/\/3dwork.io\/en\/author\/juanjo\/"},"uagb_comment_info":0,"uagb_excerpt":"Full test of the Kobra X: ACE Gen 2 integrated multicolor, 600 mm\/s, honest print quality over 3 months of daily use. Is the price justified? Read our complete review.","_links":{"self":[{"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/posts\/41099","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/comments?post=41099"}],"version-history":[{"count":1,"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/posts\/41099\/revisions"}],"predecessor-version":[{"id":41421,"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/posts\/41099\/revisions\/41421"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/media\/40594"}],"wp:attachment":[{"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/media?parent=41099"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/categories?post=41099"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/3dwork.io\/en\/wp-json\/wp\/v2\/tags?post=41099"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}