Since I started to “play” in the world of the 3D printers, about 4 years ago, I have always worked with electronics from MakerBase company. There has only been one exception, in the first printer that I bought and that introduced me fully to this world. This printer mounted a proprietary board “Made in Spain”. In the rest of the ...
Recently a colleague sent me a BLTouch / 3DTouch sensor from the Geeetech brand. I usually use optical infrared sensors for my printers, but I wanted to try the BLTouch sensors since none had fallen yet by my hands. So I got down to work for Configure BLTouch with BabyStepping in the last Marlin available today and satiate my curiosity. ...
Marlin is the most widely used open-source firmware in 3D printing. It powers millions of printers around the world — from the classic Ender-3 to high-end CoreXY machines — and has been maintained by an active community since 2011. If your printer is not running Klipper, it is almost certainly running Marlin. This guide covers Marlin 2.x (current stable: 2.1.2.7) ...
