If you like the world of 3D printing you surely know the brand Creality . Normally when we talk about Creality comes to mind its FDM printers, filament, which have undoubtedly been architects of the great expansion of 3D printing in recent years with very capable machines, a very balance between quality/price and an immense community. Today we are going to show you a line ...
When we start working with a new brand we always have that point of doubts and expectations, in this case UniFormation has pleasantly surprised us in all aspects. If you have some experience in the world of 3D printing, perhaps the UniFormation brand is not very well known. Founded in 2016 with the aim of manufacturing resin 3D printers with high quality and especially focused ...
BIQU is a brand used by Bigtreetech, well known for its electronics and one of our favourites, focused on 3D printing components. While BIQU has launched machines in the past with great quality/price, its scope has been limited when competing with other more established or well-known manufacturers. With the BIQU Hurakan has put all the meat on the grill launching a great machine at an exceptional ...
Bigtreetech has released the new SKR 3 series with two versions that include many improvements and novelties that will surely allow us to squeeze our printers to the maximum. If you need more information or help do not hesitate to join the SKR @SKR_board_32bits Telegram group. We remind you that you have more help guides in our Telegram bot @ThreeDWorkHelpBot SKR 3 and SKR 3 EZ ...
Usually, when we analyze a printer or device, we try to be as impartial as possible, but on occasions like today, when we have to do it with a Ratrig V-Minion machine, the little heart pulls us a little. A few months ago we presented you the one that from our point of view and compared to other similar machines ...
Today we are going to introduce you to the new Anycubic machine, the Anycubic Kobra Plus. It’s been a long time since we assembled a “commercial” printer and the truth is that it has been a gratifying process to have a machine working in less than 30 minutes thanks to the great work of Anycubic with this machine. Anycubic has ...
In today’s article we are going to talk about an article a little different from what we are used to analyzing but directly related to the world of 3D printing, the scanner Revopoint Pop 2 (High precision). And of course, from here we want to thank in advance to the Revopoint Pop 2 team for sending us a sample into ...
The Voron 0.1 Kit FYSETC is a very peculiar DIY 3D printer and today at 3DWork we will talk a little about its functionality and some of its features. It should be noted that the Voron 0.1, despite its size and appearance, is not a toy since basically we are going to have the same characteristics that we have in ...
Normally when we talk about Hotends it is mandatory to take as a reference the most widespread V6 of the well-known component company E3D. But as you can imagine, there are quite a few quality alternatives that improve, and quite a bit, these popular hotends. Today in 3DWork we will talk a little about a spectacular Hotend designed and manufactured ...
Cartesian 3D printers “Prusa style” have always been the most widespread when it comes to desktop. There are many models available on the market, and new ones are constantly appearing to join the current catalog. However, if you are crazy about 3D printing like us, I have no doubt that you will always look for the best machine for personal ...
In today’s article we are going to make a brief analysis of a desktop 3D printer that we received in our workshop, called Longer LK5 Pro. Although this printer is not very recent, it is the first time that it has passed through our hands thanks to the Longer company, who have been kind enough to send us a unit ...
Today at 3DWork we are going to review a mid-size resin printer (SLA) that has certainly left a good taste in our mouths. Specifically, the model we are talking about is Elegoo Mars 2 Pro. This printer uses a printing technology called stereolithography, which involves photosensitive resin (instead of filament) and ultraviolet light to generate parts on a printing surface. ...
Among the different printers that pass through our laboratory, one that pleasantly caught our attention was the Monoprice Cadet. A printer with a great build quality and focused on children or beginners who get into 3D printing safely and most importantly, without major complications. And following that interesting line, so characteristic of the company Monoprice, this time they have given ...
Today at 3DWork we are going to analyze a new integral extruder called BIQU H2 that the Chinese company BIQU has developed for its new BIQU BX printer. In case you are not aware, this new printer was successfully financed through the famous Crowdfunding platforms Indiegogo and Kickstarter recently. This new type of “integral” extruder, as I like to call ...
These last weeks, and after the article we made about the resin printer Phrozen Shuffle XL Lite, I have been working with a new closed machine on which I was interested in making a short article, the QIDI TECH X-Plus printer. The QIDI TECH X-Plus printer is developed by the well-known Chinese company QIDI Technology, which offers us both FDM ...
Some time ago the well-known Taiwanese company Phrozen surprised us with a small but fast resin printer called Phrozen Sonic Mini. This printer, of which I prepared in 3DWork an extensive article that you can read at this link, I was pleasantly surprised by its ease of use and speed. Depending on the height you selected in your slicer, it ...
I suppose that many of you, like me as I write these lines, will be enjoying a well-deserved vacation and it is even probable that you have left your 3D printers behind. I have to confess that that was my intention, but just a few days before the friends of Monoprice sent me a rather curious 3D printer that completely ...
For some time now we have been seeing in the 3D printing scene a type of stepper motors that include electronics in the back and to which a 9.6″ OLED display can be connected. You will probably wonder what they are for and what advantages they can offer us when mounting them on our printers, so in this article we ...
Today in 3DWork I have set myself the challenge of analyzing a new extruder that I was completely unaware of, but that aroused my curiosity both for its extreme simplicity and for its impeccable visual appearance (design). The name of this extruder is DyzeXtruder Pro, and it is available for practically any type of 3D printer on the market, being ...
These days ago a quite interesting 3D printer has fallen into my hands of which I certainly knew little or nothing. The model in question is the Maker Ultimate 2, and it belongs to the extensive 3D printing catalog of the Monoprice company. This Californian company develops and markets all kinds of electronic devices such as drones, speakers, projectors, 3D ...
These days ago, and despite all the problems with customs and imports from China, I have received at home a new resin printer, the Phrozen Sonic Mini. And, of course, I started to mess around with it a little, taking advantage of the situation to offer you my first impressions about it. The Phrozen Sonic Mini uses a printing technology ...