The Anycubic Kobra 4 is the perfect example of where consumer FDM printing is heading in 2026: a fast machine with automatic leveling and one-button calibration that, in its Kobra 4 Combo version, adds the new ACE 2 Pro multicolor and filament drying module. At 3Dwork we’ve had the whole setup on our desk for several weeks. We assembled it, ...
The Creality SparkX i7 (marketed under Creality’s new SparkX sub-brand) is Creality’s bet on the user who wants multicolor printing without the hassle: bedslinger frame, AI camera, automatic calibration and an assembly process that promises to be ready in under ten minutes. But the interesting part isn’t the printer itself — it’s that there is no single SparkX i7: there ...
Today we bring you our analysis of the Anycubic Photon P1 Max: the large-format variant of the Photon P1, built for anyone who needs to print large pieces in a single go —life-size helmets, props, bulky prototypes, or full batches of miniatures— without giving up the mechanical reliability and print quality that already won us over on the standard P1. ...
We keep expanding our coverage of the QIDI family, and today it’s the turn of their new pick for the high-performance segment with an active chamber: the QIDI Plus 5. If you’ve been following 3Dwork for a while, you know we’ve already covered the QIDI Plus 4, the QIDI Q2, and the QIDI X-MAX 3, so we have plenty of ...
The Creality K2 Plus is the printer that sets Creality’s new benchmark. With a 350×350×350 mm build volume, a hotend reaching 350 °C, closed-loop FOC servomotors, an actively heated chamber and the largest die-cast aluminum chassis in the lineup, it is the most complete multicolor CoreXY machine Creality has built to date. In this review we use the K2 Plus ...
Full review of the QIDI Q2 after months of use: CoreXY FDM printer with active heated chamber at 65°C, 370°C hotend and support for ABS, ASA, Nylon-CF and PC. Includes analysis of the QIDI Box, Klipper tweaks and comparison with the Q1 Pro and Q2C. ...
Full test of the Kobra X: ACE Gen 2 integrated multicolor, 600 mm/s, honest print quality over 3 months of daily use. Is the price justified? Read our complete review. ...
We thoroughly tested the Photon P1: 14K resolution, dual-bucket system for multi-resin printing, print speeds and whether the price is truly justified. Full verdict inside. ...
Today we bring you a new resin printer with a name that is very familiar to us for this type of printers but from a different brand than the one we knew for these models. The PioCreat HALOT-X1 is a 16K LCD resin 3D printer that has captured attention for its innovative features and focus on ease of use clearly focused for home use. ...
Real-world test of the Kobra 3 Combo V2: multicolor ACE Pro system, print quality, calibration tips and direct comparison with V1. Honest verdict after weeks of testing. ...
We were really looking forward to sharing with you our impressions of the new Elegoo Centauri, a fast CoreXY printer, with a high quality of results and easy to use… and also, at a very reasonable price which will make it a great option to consider for many users. We are currently living in a second or third era of 3D printing ...
Anycubic adds a new member to its M7 series, in this case the Anycubic Photon Mono M7 Max. This new Anycubic Photon Mon M7 Max brings significant new features over the Anycubic Photon Mono M3 Max model of which it would be the evolution, but including many improvements from the M7 series that we could already see in our review of the excellent Anycubic ...
We tested the Saturn 4 Ultra 16K: new 16K LCD panel, integrated heater, large build volume and sub-0.04 mm precision. Full results and honest verdict from our resin lab. ...
Hands-on review: enclosed FDM printer with integrated multicolor system, real print speeds, quality tests and our honest take after weeks of daily use. ...
We start this new year with several reviews that we will be publishing in the coming days. Today we are going to introduce you to QIDI’s new printer, the QIDI X-Plus4. You will have seen that we have analyzed different QIDI models during the last few months, taking into account the good balance between price/features/quality, in which we have seen how this brand has been improving ...
In-depth review: 10K LCD, 153×87×165 mm build volume, print times and resin compatibility tested in our lab. Real results — find out if it's worth the price. ...
We are back after a few days of rest and vacation!! We start our tour by analyzing the excellent Elegoo Saturn 4, the big sister of our beloved Elegoo Mars 5 recently reviewed and which gave us such a good performance. Elegoo is a benchmark in 3D printing both FDM (filament) and SLA (resin), this Saturn 4 Series introduces improvements over the previous generation Saturn 3 ...
We were already looking forward to bringing you the new Anycubic Kobra 3 Combo printer, a sensational machine with which making multifilament projects is going to be extremely simple. And the gap between the Anycubic Kobra 2 and this Kobra 3 is considerable, only limited to the fact that for now we only have one model and size. In case you don’t ...
In-depth review of the Mars 5 Ultra: 4K mono LCD, print speed, build quality and comparison with competitors. Real prints, no marketing filter, honest results. ...
Today we bring you the new series of Creality Ender 3 V3 printers of which we have up to 4 different models that we will talk about in more detail during the review although we will focus on its Ender 3 V3 version. Creality is a proven brand, as well as being one of the ones that contributed the most to the growth of 3D ...
If you follow us regularly, a few weeks ago we reviewed the QIDI X-Max 3, a printer that we liked in several aspects but could be improved in others. On this basis, we were especially interested in how this new QIDI Tech model, the QIDI Q1 Pro, has improved those aspects to be polished that we detected during our review. Let’s get to it!! As always ...
Our colleagues at TwoTrees have launched a very interesting new printer, the Twotrees SK1. TwoTrees is an old acquaintance in the 3D world, created in 2017 and launching its first 3D printer in 2018. In addition, TwoTrees diversified its range of solutions back in 2020 by introducing the TT series of desktop diode laser engraving, which we could already see in our workshop some time ago. Today we are ...
We tested the Creality K1 series for months: up to 600 mm/s, real print quality, Klipper mods and long-term reliability. Is it worth it in 2025? Honest, unfiltered verdict. ...
Today we bring you another printer that we really wanted to get our hands on, the new Anycubic Photon Mono M5S PRO. Anycubic is a benchmark in 3D printing both FDM (filament) and SLA (resin), this M5S PRO comes to significantly improve its M5S sibling improving many aspects of it and providing an incredible 10.1″ screen and 14K resolution as well as other interesting ...
We have to say that we were really looking forward to receiving the ELEGOO Jupiter SE, which includes several very interesting improvements over the legendary ELEGOO Jupiter. ELEGOO with its excellent Jupiter thanks to its great ratio between quality, reliability and size has always been a benchmark in this machine segment. A printer, Jupiter, that allowed you to do jobs of almost any size, although notably ...
We have always followed QIDI and its printers closely but, at least officially, we had not been able to have the option of being able to analyze them in-depth, and what better way than with the QIDI X-Max 3. Speaking with QIDI they explained to us that they had some problems during the original release temporarily halting the distribution until the problems were ...
Anycubic has renewed its successful Kobra series with the new Kobra 2. The new Kobra 2 improves in an exceptional way in terms of software and hardware to take advantage of the full potential of these new models. In case you don’t know, Anycubic, which is already a veteran in the 3D world, has a wide range of FDM and SLA models that we invite you to ...
If you like the world of 3D printing you surely know the brand Creality . Normally when we talk about Creality comes to mind its FDM printers, filament, which have undoubtedly been architects of the great expansion of 3D printing in recent years with very capable machines, a very balance between quality/price and an immense community. Today we are going to show you a line ...
When we start working with a new brand we always have that point of doubts and expectations, in this case UniFormation has pleasantly surprised us in all aspects. If you have some experience in the world of 3D printing, perhaps the UniFormation brand is not very well known. Founded in 2016 with the aim of manufacturing resin 3D printers with high quality and especially focused ...
The Elegoo Saturn 3 is a resin 3D printer with a large 12k screen. Print quality is incredibly sharp and detailed thanks to this screen, and the printer itself is very easy to use. The Saturn 3 is a huge upgrade to its previous model, the Elegoo Saturn 2, especially the Saturn 3 Ultra. La Saturn 3 es rápida y ...
